Protect.
Sustainable.
Fortify.
Rugged & Durable.
Secure.
Multi-use.
Modular.
©Leading Edge Group Inc.
Models
LEGI SERIES 480-12×6
<< Back to Models

The LEGI Series 480-12×6 Compressed Soil Block Machine is fully automated and produces up to 480 compressed soil blocks per hour of load-bearing, non-fired, structural blocks for all kinds of construction projects. The machine has the production capabilities of the LEGI 480 but it makes the smaller blocks that are much easier to handle (12”x6”) The machine can be set to vary the thickness of the blocks from 2.0 to 4.5 inches. Soil is loaded into the machine with a front-end loader or bobcat-type loader.

ORDER SPECIFICATION SHEET
Machine Specifications and Production Limits
  • Weight: 5,000 pounds
  • Dimensions: Width 7’2″ Length 12’6″ Height for transport 75″ Operating 96″
  • Hydraulics: Worldwide hydraulics, Beta rated filter, 50 gallon oil capacity, motor driven forced air cooler
  • Tires: The machine comes equipped with Heavy Duty, Steel Belted, 10 ply, Commercial Grade trailer tires
  • Hopper Capacity: 1 cubic yard (2,200 to 2,300 lbs.)
  • Additive Hopper: 12 cu ft. = 1,150 lbs. cement
    500 lbs. lime
    550 lbs. fly ash
  • Mixing Trough: Roll out rubber trough with replaceable trough liner and bolt on replaceable paddles
  • Production: Variable up to 10+ cubic yards per hour (22,000 lbs.)
  • Engine: Yanmar 4TNV88, 47.5 HP, low oil pressure and over heat protection, California certified tier IV engine
  • Trailer: USA lighting package, 1-6,000 lb. axle, brakes on axle, pintle hook hitch, can be towed by heavy half ton or ¾ ton standard pickup. Helicopter lifting hooks, hydraulic surge brakes with auto backup and parking brakes. May be towed at legal highway speed or as road condition dictates
  • The machine shall be capable of producing blocks that are 12” long x 6” wide.

STANDARD FEATURES

  • The fuel usage shall be less than 1.75 gallons of diesel per hour of operation
  • The machine shall have the capability to replace the breech wear plates
  • The machine shall have the capability to replace the tray wear plates
  • The machine shall be equipped with a 48 horsepower or less engine
  • The machine shall be equipped with a pintle hook hitch placed at Humvee height
  • The machine shall be equipped with four (4) helicopter lifting hooks each capable of lifting a minimum of 6,500 pounds each
  • The operating engine shall be equipped with Murphy safety shut downs over heat and oil pressure
  • The machine shall be equipped with hydraulic brakes (surge) with auto reverse
  • The machine shall be equipped with a mechanical parking brake
  • The machine shall be equipped with either Goodyear Wrangler MT Military .OZ Load Range D 37×12.50R16.5 M+S run flat tires (Humvee) OR Heavy Duty, Steel Belted, 10 ply, Commercial Grade trailer tires
  • The machine shall be equipped with solid state Omron Industrial Controllers housed in a NEMA 12 Box
  • The machine shall be equipped with a beta rated oil filtration system

UNIQUE FEATURES

  • The machine comes equipped with Heavy Duty, Steel Belted, 10 ply, Commercial Grade trailer tires
  • Pintle hook hitch
  • Four (4) lifting anchors attached for spreader bars and sling lifts for helicopter use
  • Military required emergency brake system
  • Upgraded heavy duty suspension system
  • Heavy duty single axle design
  • Extreme condition air filtration system with pre-cleaner filter
  • Single hopper design for precise blending capabilities
  • Standard desert tan paint scheme